The CXIS-3022 computerized x-ray inspection system is suitable for screening medium packages, handbag security inspections, briefcase security inspections, and carryon luggage screening. This PC based x-ray screening system is easy to operate and ideal for weapon detection, potentially dangerous liquid detection, loss prevention, and other xray security inspection and contraband detection requirements for security checkpoints and mailroom security.
This conveyor based x-ray screening system has a tunnel opening of 30.5" (775mm) wide by 22.6” (575mm) high, incorporates a high resolution x-ray detector array, and latest algorithms to enhance detection and imaging performance. The CXIS-3022 x-ray system incorporates a 160kV generator and will penetrate up to 30mm of steel.
CXIS-3022 Imaging Characteristics:
Black & White, Reverse Monochrome, & Pseudo Color
Dual Energy Imaging System
Geometrical Distortion Correction
Color to Gray Scale Imaging
Programmable Zoom 2X to 32X
Edge Sharpening
Programmable Penetration Levels
Automatic Z measurement
Operator Training Program
Density Alert
Organic & Inorganic Imaging
Automatic Image Archiving - 25,000 images
Image Review - Last 50 Images
Variable Contrast Level Control
Dual 17" LCD Flat Panel Color Monitor
Network Compatible
The CXIS-3022 x-ray inspection system can be networked with other x-ray inspection systems for high speed data transmission via Ethernet. It uses a Windows 2000 based operating system running a TCP/IP network protocol system. Images from each CXIS-3022 xray system can be sent through the network to a central server where they are viewed, stored, or printed.
Standard Features
Sensitivity
42 AWG
Spatial Resolution
1mm both vertical and horizontal
Penetration
30mm Steel
Contrast Sensitivity
At least 24 levels visible as measured by a step wedge, 4096 gray level
Programable Zoom
2X to 32X
Video Displays
Dual 17" LCD Flat Panel Monitors
Image Manipulation
One monitor at a time
No Pixel Distortion
Up to 8 times zoom
Atomic Number Measurement
Accuracy within 0.5 counts
Power Requirements
110-120 VAC, 50-60 Hz, 15 Amps max 220-240 VAC, 50-60Hz, 10 Amps max
UPS (Uninterrupted power supply)
Shuts down computer 2 minutes after power failure
Tunnel Opening
30.5" (775mm)wide by 22.6" (575mm) high
Automatic Image Archiving
Up to 25,000 images in a rotating buffer
Manually save Image
In windows format to view on personal computers or laptops
Print Image
Any user-provided printer configurable by Win 2000
Complete Specifications
X-Ray Generator
Optional Accessories
Voltage
160 kVp
Entry/ Exit Rollers (1.0m or 1.5m long)
Duty Cycle
100%
Exit Table (1.0 m long)
Cooling
Sealed oil bath
Threat Image Projection (TIP)
4-Level Security Access
Screener Assist Threat Detection
X-Ray Detector
Screener Training Program
1664 photodiodes in an "L" Shapped configuration
Advance Image Archiving (100,000 images)
Remote Operator Workstation
Physical Specifications
Network Supervisor Station
Weight
Approximately 1250 Kg
180k X-ray Generator
Shipping Weight
Approximately 1375 Kg
Inclined Conveyors
Environmental Conditions
Processor
Operating Temperature
0°C to 45°C
At least a Pentium-IV, 3.0 Ghz with hyperthreading technology, 512MB RAM, Advanced Video Graphics Card with 128MB RAM, 40GB Hard Disk
Storage Temperature
-20°C to 60°C
Humidity
less than 95% non-condensing
Design Policy
Health & Safety
American Innovations, Inc. pursues & reserves the right to change specifications at any time without notice in the course of continuous development. Any such changes are implemented to maintain or improve the products offered. Equipment may differ in a small detail from the description given.
Complies with published international health and Safety standards including the U.S. F.D.A. Center for Devices and Radiation Health standards for cabinet x-ray devices (Federal Standard 21-CFR 1020.40). Typical radiation leakage is less than 0.1mR/hr. That is considerably less than the maximum allowed rate of 0.5mR/hr. permitted by Federal law. Film safety is guaranteed for high speed films up to ISO 1600.
