The CXIS-4040 computerized x-ray inspection system is ideal for xray screening large packages, luggage screening security inspections, and bulk mail security screening. This PC based x-ray screening system is easy to operate and ideal for weapon detection, potentially dangerous liquid detection, bomb detection, loss prevention, and other xray security inspection and contraband detection applications requiring xray imaging.
This conveyor based x-ray screening system has a tunnel opening of 40" (1,016mm) wide by 40” (1,016mm) high, incorporates a high resolution x-ray detector array, and latest algorithms to enhance detection and imaging performance. The CXIS-4040 x-ray system incorporates a 160kV xray generator and will penetrate up to 29mm of steel.
CXIS-4040 Imaging Characteristics
Black & White, Reverse Monochrome, & Pseudo Color
Dual Energy Imaging System
Geometrical Distortion Correction
Color to Gray Scale Imaging
Programmable Zoom 2X to 32X
Edge Sharpening
Programmable Penetration Levels
Automatic Z measurement
Operator Training Program
Density Alert
Organic & Inorganic Imaging
Automatic Image Archiving - 25,000 images
Image Review - Last 50 Images
Variable Contrast Level Control
Dual 17" LCD Flat Panel Color Monitor
Network Compatible
The CXIS-4040 x-ray inspection system can be networked with other x-ray inspection systems for high speed data transmission via Ethernet. It uses a Windows 2000 based operating system running a TCP/IP network protocol system. Images from each CXIS-4040 xray system can be sent through the network to a central server where they are viewed, stored, or printed.
Standard Features
Sensitivity
38 AWG
Spatial Resolution
1mm both vertical and horizontal
Penetration
29 mm Steel
Contrast Sensitivity
At least 24 levels visible as measured by a step wedge, 4096 gray level
Programable Zoom
2X to 32X
Video Displays
Dual 17" LCD Flat Panel Monitors
Dose per Inspection
Less than 0.1mR typical
Image Manipulation
One monitor at a time
No Pixel Distortion
Up to 8 times zoom
Atomic Number Measurement
Accuracy within 0.5 counts
Power Requirements
110-120 VAC, 50-60 Hz, 15 Amps max 220-240 VAC, 50-60Hz, 10 Amps max
UPS (Uninterrupted power supply)
Shuts down computer 2 minutes after power failure
Density Threat Alert
Programmable levels
Tunnel Opening
40" (1,016mm) wide by 40” (1,016mm) high
Automatic Image Archiving
Up to 25,000 images in a rotating buffer
Manually save Image
In windows format to view on personal computers or laptops
Print Image
Any user-provided printer configurable by Win 2000
Complete Specifications
X-Ray Generator
Optional Accessories
Voltage
160 kVp
Entry/ Exit Rollers (1.0m or 1.5m long)
Duty Cycle
100%
Exit Table (1.0 m long)
Cooling
Sealed oil bath
Threat Image Projection (TIP)
Filtering
3 mm Al
4-Level Security Access
Tube Current
0.7mA
Screener Training Program
Beam Direction
Upward Configuration
Advance Image Archiving (100,000 images)
Remote Operator Workstation
Network Supervisor Station
Physical Specifications
Inclined Conveyors
Weight
Approximately 1400 Kg
Dual Speed Conveyors
Conveyor Speed
13.7m/min
180k X-ray Generator
Conveyor Height
30" (762mm)
Available in 0.5m or 1.0m Conveyor Extensions
Conveyor Capacity
200Kg evenly distributed
Construction
Steel frame on casters
X-Ray Detector
Environmental Conditions
2304 photodiodes in an "L" Shapped configuration
Operating Temperature
0°C to 45°C
Storage Temperature
-20°C to 60°C
Processor
Humidity
less than 95% non-condensing
At least a Pentium-IV, 3.0 Ghz with hyperthreading technology, 512MB RAM, Advanced Video Graphics Card with 128MB RAM, 40GB Hard Disk
Design Policy
Health & Safety
American Innovations, Inc. pursues & reserves the right to change specifications at any time without notice in the course of continuous development. Any such changes are implemented to maintain or improve the products offered. Equipment may differ in a small detail from the description given.
Complies with published international health and Safety standards including the U.S. F.D.A. Center for Devices and Radiation Health standards for cabinet x-ray devices (Federal Standard 21-CFR 1020.40). Typical radiation leakage is less than 0.1mR/hr. That is considerably less than the maximum allowed rate of 0.5mR/hr. permitted by Federal law. Film safety is guaranteed for high speed films up to ISO 1600.
